Possible enumeration values:
| Name | Value | Description |
|---|---|---|
| None |
-1 |
No reading type |
| Generic |
0 |
Generic reading type |
| Status |
10 |
The status is a word or words indicating the current status of the device. e.g "On", "Off", "Shutting down"... |
| Voltage |
20 |
Voltage reading |
| Current |
30 |
Current reading |
| Digital |
40 |
Digital I/O reading, i.e. state of a relay switch, state of a digital electrode for monitoring water levels, etc |
| Digital_Inverted |
41 |
Digital I/O reading, i.e. state of a relay switch, state of a digital electrode for monitoring water levels, etc This is "Inverted" to indicate that the hardware output is inverted compared to a standard Digital channel |
| Rainfall |
50 |
Rainfall reading, i.e. rain since 9am, rain during the week, etc |
| Height |
60 |
Height reading, i.e. height of water in a tank, height of a device, etc |
| Depth |
61 |
Depth reading, i.e. depth of a hole, etc |
| SWL |
62 |
Standing Water Level reading, i.e. how far below ground-level a bore's water is |
| Load |
70 |
Load reading, i.e. load exerted on a load cell |
| Weight |
71 |
Weight reading, i.e. weight of a tank |
| Pressure |
80 |
Pressure reading |
| Speed |
90 |
Speed reading, i.e. of a fan, wind speed, etc |
| Temperature |
100 |
Temperature reading, i.e. of room, of device, etc |
| RelativeHumidity |
110 |
Relative Humidity reading |
| Flow |
120 |
Flow rate reading, i.e. flow rate of a watering system |
| Volume |
130 |
Volume reading, i.e. volume of a dam |
| Direction |
140 |
Cardinal/Ordinal direction |
| EC |
150 |
Electrical Conductivity |
| pH |
160 |
pH Level |
| RSSI |
170 |
Received Signal Strength Indicator (RSSI) |
| URL |
200 |